Hanseatic WQP12-J7609D, Руководство пользователя

Страница: 51 / 67

Page EN-17
Dishwasher operation
Preparation
1. Open the valve completely.
2. Close the dishwasher door.
3. Switch the dishwasher on using the but-
ton (1).
The display (8) will initially show all notifi-
cations. After a short time, the programme
symbol (10)for the ECO programme will
light up.
Selecting the dishwasher
programme
(1) (4)
(8)
(10)
1. Look for the appropriate dishwasher pro-
gramme with the help of the “dishwasher
programme table”, see page EN-16.
2. Press the programme selection button
(4) as often as required until the desired
programme lights up in the programme
display (10).
The display (8) shows the cycle duration.
3. For the washing programme,
– if you wish to make further adjustments,
continue with (see „Choosing additional
options“ on page EN-17).
– if you wish to launch it, continue with (see
„Starting the dishwashing programme“
on page EN-18).
Choosing additional options
(2) (3) (5)
(8)
(11) (12) (15)
You can combine the various dishwashing
programmes (10) with additional options.
Delayed start
The dishwashing cycle normally begins im-
mediately after you press the start/pause
button
(6). If you want the cycle to begin
later, you can specify this. The start time can
be delayed between 1 and 24 hours
• Press the delayed start button (2) as often
as required until the display (8) shows the
desired delay (
H:00
,
H:01
to
h:24
).
Selecting a spraying arm
If only one of the two dish racks is loaded, you
should deactivate the spraying arm which
you do not require.
– Upper dish rack loaded:
– Lower dish rack loaded:
• Push the (3) button as many times as
required until only the symbol (15) on the
desired spraying arm is illuminated.
Dishwasher operation