Page EN-22
Installation
Important user information
The glass ceramic hob is intended to be fitted
in a kitchen worktop or the like. If you have
the requisite skills, you can fit the hob your-
self. However, the electrical connection must
be carried out by authorised specialist staff.
Requirements
To ensure proper operation, the following re-
quirements must be met:
– The appliance complies with heat protec-
tion class 'Y' (EC 335-2-6), which means
that only one side of the appliance is al-
lowed to be next to taller kitchen units or
walls. The built-in furniture must have cov-
erings and the adhesives used must be
heat-resistant (100 °C). If this is not the
case, this can lead to deformation or de-
tachment of the covering surface. If you
do not know the thermal resistance of your
kitchen furniture, leave a gap of approxi-
mately 2 cm between the furniture and the
cooker.
– The distance between the appliance and
the extractor hood must be at least 760
mm.
– Always install extractor hoods in accord-
ance with their user manuals.
– Do not place the cooker directly next to a
refrigerator or freezer. This will increase its
energy consumption unnecessarily due to
heat emission.
– You must leave at least 50 mm of free
space below the recess for ventilation pur-
poses. No heat-sensitive items (cabinets,
drawers etc.) should be found in this area.
Any side walls or drawers which are pres-
ent must be sawn out or dismantled ac-
cordingly.
Preparing food
To ensure proper operation, the following re-
quirements must be met:
– The worktop must be at least 30 mm thick
and at least 590 mm deep, must be hori-
zontal and level and must be sealed on the
wall side against overflowing liquids.
– The appliance must be surrounded by at
least 50 mm of worktop on all sides.
min. 760 mm
min. 50 mm
Air outlet
min. 5 mm
Air inlet
min. 20 mm
If the appliance is separated from the rest of
the mounting cupboard using a horizontal fix-
ing plate, the space between the base of the
appliance and the fixing plate must be at least
50 mm high.
– If the appliance is separated from the rest
of the mounting cupboard using a vertical
fixing plate, the space between the wall
and the fixing plate must measure at least
20 mm.
Installation
Содержание MC-IF7021B2
Страница 60: ......