Cleaning the interior
The fridge does not need to be defrosted
as it is equipped with an automated thawing
function. Frost and ice are automatically de-
frosted and the thaw water is collected in a
thaw water container on the reverse side of
the appliance. The thaw water evaporates as
a result of the heat generated by the motor.
1. Remove the vegetable drawer (8) the
cold-storage compartment (10) and the
glass shelves (9) and (12).
2. In order to remove the door shelves (3)
or the bottle racks (5), push them togeth-
er slightly at the sides and simultaneous-
ly pull them upwards out of the holders.
3. Clean all of the parts in lukewarm soapy
water. Then dry everything thoroughly.
4. Wipe down the inside with warm water
and washing-up liquid.
5. When wiping clean, add a few drops of
vinegar to the water to prevent mould
from forming.
6. Wipe the interior dry and leave the door
open a while to air.
7. Only clean the door seals with clean wa-
ter; they are sensitive to oil and grease.
8. Replace the glass shelves, the drawers
and the door shelves.
Interior lighting
WARNING
Risk of electric shock!
Touching live parts may result in severe
injury or death.
■
Do not remove the covers from the in-
terior lighting.
■
Do not attempt to replace the interi-
or lighting.
Maintenance-free LEDs are used to light the
appliance. If the interior lighting does not
work, contact our customer service depart-
ment (see page EN-28).
Care and maintenance
Page EN-20
