Changing the door hinges
Page EN-31
(34)
(10)
9. Tilt the unit slightly backwards against
a wall so that the lower hinge (34) is
accessible.
10. Remove the levelling feet (10) on both
sides.
11. Unscrew the lower hinge.
Preparing the doors and
hinges for repositioning
(36)
(34)
1. Reposition the hinge pin (36) of the
hinge (34) as displayed above.
(34)
(35)
2. Move the screw (35) to the opposite side.
Use the screwdriver to tighten the
screws by just 2 to 3 turns, and then
use the 8 mm spanner to tighten them fully.
3. Replace the lower hinge (34) by screwing
it onto the opposite side. Replace the
levelling feet (10).
(37)
4. Using a flat-tip screwdriver, turn the two
dummy plugs (37) until the slits are in a
vertical position, at which point they can
be removed.
5. Then reposition the dummy plugs on
the opposite side, and turn them using a
flat-tip screwdriver until the slits are in a
horizontal position.
(38)
6. Reposition the two dummy plugs (38)
on the upper-facing side of the freezer
door (8) on the opposite side.
