Start-up
Page EN-29
■
Do not kink or pinch the mains cable
or lay it over sharp edges. This can
result in a break in the cable.
CAUTION
Fire hazard!
Improper handling of the appliance can
lead to fire and damage to property.
■
Connect the appliance only to a
properly installed and earthed electric
socket. Do not connect to a multi-
socket extension cable or a multi-
socket plug.
NOTICE
Risk of damage!
If the cooling unit has been transported
horizontally, lubricant from the com-
pressor may get into the cooling circuit.
■
If possible, do not tilt the cooling
appliance horizontally.
■
Allow the appliance to stand upright
for approx. 2 hours after transport
and before connecting. This allows
the lubricant enough time to flow
back into the compressor.
• Insert the mains plug into an easily
accessible and properly installed socket
(220–240 V~ / 50 Hz).
You will find all important information
about operation from Pagepage EN-12.