Page EN-33
Troubleshooting table
Troubleshooting table
Problems with operation
Problem
Possible cause
Solution
The dishwasher cannot
be switched on.
The mains plug has not
been inserted into a socket.
Insert the mains plug into the
socket.
There is no voltage being
supplied through the socket.
Check the fuse. Check the socket
by connecting another device.
The selected dishwash-
ing programme will not
start or it stops.
The appliance door is not
closed properly.
Close the appliance door.
The water tap is not properly
on.
Turn the water tap on completely.
The inlet hose is defective.
Contact our service centre (see
page EN-36).
There is a risk of overflow-
ing. The electrical water stop
system has been activated.
Malfunctions can occur in all electrical appliances. This does not necessarily mean
there is a defect in the appliance. For this reason, please check the tables to see if you
can correct the malfunction.
WARNING!
Risk of electric shock in case of improp-
er repair!
Conducting improper repairs to the
dishwasher puts the person carrying
out the repairs and the user in danger.
■
Only authorised specialists may re-
pair the dishwasher. If in doubt, con-
tact our service department (see
page EN-36).
■
Only carry out the actions which are
described in this user manual.
■
Never repair defective dishwashers – or
dishwashers which you presume to be
defective – yourself. You can endanger
yourself and subsequent users.
NOTICE
Risk of damage!
Improper handling of the dishwasher
can lead to property damage and to
damage to the dishwasher.
■
If water overfl ows, switch off the wa-
ter supply immediately and then con-
tact the service team (see page EN-36).
■
If the water has overfl owed, remove
any water standing in the dishwasher
before restarting a dishwashing pro-
gramme.
