Page EN-24
Dishwasher operation
Starting the dishwashing
programme
1. Close the dishwasher door.
If you
– have not set up a start delay,
the programme cycle will begin after a
few seconds.
– have set a delayed start, the duration of
the delay remains visible on the display;
the dots between
H
and the hour digit
also flash. After the start delay runs out,
the programme will start.
During the programme cycle the display
shows the remaining time; the dots be-
tween the hour and minute digits flash.
At the end of the programme cycle,
an acoustic signal will sound 8 times and
the display will show
end
.
2. Turn the tap off.
3. Wait a little while before unloading the
dishwasher.
Unloading the dishwasher
CAUTION!
Risk of scalding!
If you open the dishwasher door,
hot steam will come out.
■
Maintain a suffi cient distance from
the door and do not hold your head
or upper body directly above the
open door.
■
Make sure that children do not open
the door if the programme has only
fi nished a short time ago.
■
Only open the door slightly to allow
the steam to escape more easily.
■
Allow the dishes to cool before un-
loading the dishwasher.
Tripping hazard!
An open dishwasher door can quickly
become a tripping hazard.
■
Close the door after every use.
■
Only leave the door slightly open to
cool down.
NOTICE
Risk of damage!
■
Make sure that children and pets do
not stand on the open door.
Once the programme has come to an end
and the dishes have cooled, you can remove
them.
1. When unloading the dishwasher,
start with the lower rack and then unload
the upper rack. This will prevent water
dripping onto the lower layer of dishes
from the top layer of dishes.
2. Leave the dishwasher door slightly open
so that the inside of the dishwasher can
also cool off and dry out.
If no further settings are made, the appliance
will automatically switch off after 15 minutes.
(1)
(8)
(9)
(10)
(11)
(13)
(2)
(6)
(5)
(7)
