Page EN-37
Troubleshooting table
Troubleshooting table
Problem
Possible cause
Solution
1
The dishwasher
cannot be switched on.
The mains plug has not
been inserted into a socket.
Insert the mains plug into the socket.
There is no voltage be-
ing supplied through the
socket.
Check the fuse. Check the socket by
connecting another device.
2
The selected pro-
gramme will not start
or it stops.
The button
was not
pressed.
Press button
.
The dishwasher’s door is
not closed properly.
Close the dishwasher door.
The water tap is not
properly on.
Turn the water tap on completely.
The inlet hose is
defective.
Contact our service department (see„Service“
on page EN-40).
There is a risk of over-
flowing. The electrical wa-
ter stop system has been
activated.
Malfunctions can occur in all electrical appliances. This does not necessarily mean
there is a defect in the appliance. For this reason, please check the tables to see if you
can correct the malfunction.
WARNING!
Risk of electric shock in case of improp-
er repair!
Conducting improper repairs to the
dishwasher puts the person carrying
out the repairs and the user in danger.
■
Only authorised specialists may
repair the dishwasher. If in doubt,
contact our service department
(see page EN-40).
■
Only carry out the actions which are
described in this user manual.
■
Never repair defective dishwashers
– or dishwashers which you presume
to be defective – yourself. You can en-
danger yourself and subsequent users.
NOTICE
Risk of damage!
Improper handling of the dishwasher
can lead to property damage and to
damage to the dishwasher.
■
If water overfl ows, switch off the wa-
ter supply immediately and then con-
tact the service team (see page EN-40).
■
If the water has overfl owed, remove
any water standing in the dishwash-
er before relaunching a dishwashing
programme.
