Start-up
Page EN-20
Choose a suitable location
Safety
For safety reasons, the room in which it is
installed must have a minimum size.
Model
Room size
HGT8595A3
6
m³
HGT85112A3
7
m³
HGT85129A3
8
m³
Airflow
To ensure adequate air circulation,
– the chest freezer should not stand directly
against the wall. Leave at least 15 cm from
the wall, cabinets and other appliances.
– the ventilation grilles must remain clear
and must not be covered.
– the entire area above the chest freezer
must be unobstructed.
Cooling capacity
To achieve the highest possible cooling per-
formance with the least energy consumption,
choose a location that:
– is not too warm, is dry and well ventilated,
– is not in direct sunlight,
It is recommended not to place it next to an
oven, stove or radiator.
If underfloor heating is installed in the room
where the chest freezer is to be installed,
place an insulating plate of solid material un-
der the chest freezer.
Set up the chest freezer and
align
1. Place the chest freezer on a base that is
as flat and firm as possible.
2. Check the position with a spirit level.
3. Level out any unevenness on the ground
using both of the front levelling screws. To
do this
– close the lid.
– tilt the chest freezer slightly to the right.
– twist the levelling screws in or out until
the chest freezer is vertically level and
set the chest freezer straight back down
again.
4. Check the alignment with a spirit level.
When opening the lid, the chest freezer
should not shift.
Connecting the chest freezer
NOTICE
Risk of damage!
The coolant must be allowed to settle
before connecting.
■
After transport leave the appliance to
stand for 2 hours.
• Connect the mains plug to a properly in-
stalled socket (220-240V ~ / 50Hz / 10A).
The Power indicator illuminates.
