Page EN-37
Troubleshooting table
The dishwashing results are not satisfactory
Problem
Possible cause
Solution
There are residues or
streaks on the dishes.
The rinse aid is incorrectly
dosed.
Adjust the dispensed dose (see
“Changing the rinse aid dose” on
page EN-15).
There is no dishwasher salt.
Add dishwasher salt (see “Adding
dishwasher salt” on page EN-16).
The dishwasher salt is
clumpy.
Stir the dishwasher salt using the
end of a spoon or similar.
The dishes are not
completely clean.
There are food scraps which
are encrusted onto the dishes.
Soak dirty dishes prior to washing
the dishes.
The dishes have not been
stacked optimally.
Stack the dishes in such a way
that all parts can be reached by
the water jets (see “Loading the
dishwasher” on page EN-17).
You have selected the
incorrect dishwashing pro-
gramme.
Select the correct dishwashing
programme (see “Programme ta-
ble” on page EN-21).
The dishwasher detergent is
incorrectly dosed.
Use the correct dosage of dish-
washer detergent (see “Pro-
gramme table” on page EN-21).
The water pressure is too
low.
Turn the water tap on completely.
The spraying arm can not
rotate unhindered.
Ensure that no dishes are imped-
ing the motion of the spraying arm.
The nozzles on the spraying
arm are blocked/calcified.
Clean the nozzles (see “Checking
and cleaning the spraying arms”
on page EN-28).
