Page EN-33
Troubleshooting table
Troubleshooting table
Problems with operation
Problem
Possible cause
Solution
The dishwasher cannot
be switched on.
The mains plug has not been
inserted into a socket.
Insert the mains plug into the
socket.
There is no voltage being
supplied through the socket.
Check the fuse. Check the socket
by connecting another device.
The selected dishwash-
ing programme will not
start or it stops.
The dishwasher’s door is not
closed properly.
Close the dishwasher door.
The water tap is not on prop-
erly.
Turn the water tap on completely.
The inlet hose is defective.
Contact our Service Centre (see
page EN-36).
There is a risk of overflowing.
The electrical water stop sys-
tem has been activated.
Malfunctions can occur in all electrical appliances. This does not necessarily mean
there is a defect in the appliance. For this reason, please check the tables to see if you
can correct the malfunction.
WARNING!
Risk of electric shock in case of improp-
er repair!
Conducting improper repairs to the
dishwasher puts the person carrying
out the repairs and the user in danger.
■
Only authorised specialists may re-
pair the dishwasher. If in doubt, con-
tact our service department (see
page EN-36).
■
Only carry out the actions which are
described in this user manual.
■
Never repair defective dishwashers –
or dishwashers which you presume to
be defective – yourself. You can en-
danger yourself and subsequent us-
ers.
NOTICE
Risk of damage!
Improper handling of the dishwasher
can lead to property damage and to
damage to the dishwasher.
■
If water overfl ows, switch off the wa-
ter supply immediately and then con-
tact the service team (see page EN-36).
■
If the water has overfl owed, remove
any water standing in the dishwasher
before restarting a dishwashing pro-
gramme.