Operation
Page EN-13
Change temperature
You can set the temperature to between
+2 °C and +8 °C.
• Press the button
C
(14) repeatedly until
the desired temperature is shown.
+5 +4 +3 +2
+8
+7
+6
The temperature is reduced by 1 °C each
time you press the button. When the set-
ting r2 °C, the display jumps to
+8 °C when pressed again.
The correct temperature in the fridge is +6 °C.
The ideal storage temperature in the freezer
is –18 °C.
Activating Quick refrigerating
The “Quick refrigerating” mode rapidly cools
the inside of the refrigerator.
• To activate Quick refrigerating, press the
button (12).
The indicator will appear on the dis-
play (13).
The temperature indicator will show
+2 °C.
Deactivating Quick refrigerating
Quick refrigerating is automatically deactivat-
ed after 6 hours.
• To deactivate Quick refrigerating manual-
ly, press the button (12).
The indicator will go out. The temper-
ature indicator will return to the original
setting.
Door alarm
The energy consumption and the tempera-
ture inside the appliance can increase if the
appliance door (2) is opened often or for long
periods of time.
If the appliance door is left open for more than
60 seconds, 3 beeps will sound every 60 sec-
onds for 10 minutes. The indicator will flash
on the display (13).
• Close the appliance door.
• To disable the door alarm, press the but-
ton (15).
Rearranging the shelf
The glass shelf (9) can be removed and rear-
ranged if necessary.
You will achieve the most efficient use of en-
ergy for your appliance if you combine the
glass shelves and door shelves, as shown in
the figure on page EN-11.
1. Lift up the glass shelf and remove it.
2. Slide the glass shelf into the new position.
