Start-up
Page GB-22
The installation recess and
ventilation
The installation recess must fulfil various re-
quirements.
– The installation recess must not have a
rear panel and must have the following
measurements:
– Height (H) min. 880 mm
– Width (W) min. 560 mm
– Depth (D) min. 550 mm
– The installation recess must be located
near a properly installed earthed socket so
that the mains cord of approx. 1520 mm is
long enough to connect the appliance to
the power supply.
– To achieve sufficient ventilation around the
refrigerator, the specifications of the nec-
essary ventilation cross-section must be
adhered to.
– Ventilation of the compressor and con-
denser occurs through an opening that
must be present underneath the kitchen
cabinet (size of the opening: 200 cm
2
).
– There must also be an opening on top
of the kitchen cabinet to make sure that
air can escape (size of the opening: 200
cm
2
).
200 cm
2
200 cm
2
90°
– The installation recess must be screwed
to the neighbouring cabinets or to the wall
and carefully aligned. The cabinet doors
must be aligned and the hinges tightened.
Содержание HEKS 8854GA1
Страница 64: ......