Installation
Page EN-35
Transport
NOTICE
Risk of damage!
■
If a trolley is used to move the oven,
the appliance must be lifted as shown
on the packaging.
Your oven comes in sturdy packaging and is
so heavy that it should not be carried by one
person alone.
General installation
The oven has been designed to be built into
a kitchen unit. If you have the requisite skills,
you can fit it yourself.
However, the electrical connection must be
carried out by an authorised professional
Required materials
(6)
(7)
(8)
(6) 2× Bracket for attaching the glass
ceramic hob to a worktop
(7) 2× Screw for attaching bracket
(8) 2× Screw for attaching oven
Installation requirements
– The hob may only be installed with
one
side next to
higher
kitchen furniture, appli-
ances or walls.
– The worktop must be positioned horizontal-
ly and should be sealed against any over-
flowing liquids on the wall side.
– The oven should not be
installed directly
beside refrigerators or freezers. Heat out-
put increases their energy consumption
unnecessarily.
– Keep the oven at least one centimetre away
from the wall. The
cooker power connec-
tion
must therefore be a flush-mounted
box or must be located outside the instal-
lation space.
– The hob and oven are connected by the
permanently installed wiring harness; they
must therefore be installed in
direct align-
ment
to each other.
– Veneers, plastic coverings and adhesives
used must be resistant to heat (100 °C).
– The minimum distances specified as fol-
lows must be observed.
Installation
Содержание HBCO7010PA1
Страница 96: ...Technical specifications Page EN 48...