Safety
Page EN-7
must replace it in order to
prevent risks.
■
Only use the appliance with
enclosed mains adapter
JOD-S-120100GS.
■
Changes and repairs to the
appliance may only be car-
ried out by authorised spe-
cialists such as our service
team (see page EN-20). Un-
authorised repairs to the
appliance can cause prop-
erty damage and personal
injury, and invalidate liabili-
ty and warranty claims.
■
Never open the housing.
■
Do not attempt to repair an
appliance which is defec-
tive or could be defective.
■
Only parts corresponding to
the original appliance spec-
ifi cations may be used for
repairs.
This appliance contains
electrical and mechanical
parts which are essential
for protection against po-
tential sources of danger.
■
Do not connect to a power
strip, multiple socket outlet,
timer or to a separate re-
mote-controlled system for
distance monitoring and
control.
■
The ON/OFF switch does
not disconnect the appli-
ance from the mains. En-
sure you plug the appliance
into an easily accessible
socket so that it can be
quickly disconnected from
the mains in the event of a
fault.
■
Always disconnect the
blender from the supply if it
is left unattended and be-
fore assembling, disassem-
bling or cleaning.
■
Always pull the mains plug
out of the socket,
–
when the appliance is not
in use;
–
if a malfunction occurs;
–
if there is a storm with
thunder and lightning.
■
Do not put any objects in or
through the housing open-
ings and ensure that chil-
dren cannot insert any ob-
jects in them.
■
Keep the appliance, the
mains plug and the mains
cord away from open
fl ames and hot surfaces.
■
Do not kink or pinch the
mains cable or lay it over
sharp edges. This could
cause damage to the insu-
lation and/or break the ca-
ble.
