Set-up and start-up
Page EN-17
Unpacking the appliance
WARNING
Microwave hazard!
The cover in the cooking chamber
serves to protect the magnetron, which
emits the microwaves.
■
Never remove the cover inside the
cooking chamber!
• Completely remove all protective films
from the housing, the inside of the door
and the cooking chamber.
Choosing the correct set-up
location
WARNING
Fire hazard!
Improper handling of the appliance
may result in damage or may cause a
fi re. Heat trapped inside the appliance
may shorten its service life.
■
Ensure suffi cient ventilation. Do not
cover the vents, for example with
oven mitts or cookery books.
■
When setting up the appliance, en-
sure that the minimum
safety dis-
tances
are maintained which are
specifi ed in the user manual.
■
Do not put the appliance in a cup-
board.
The set-up location must fulfil the following
conditions:
Safety distances:
Set-up height, measured
from the ground, at least
85 cm
From above
30 cm
From the rear
0 cm
From the left
20 cm
From the right
20 cm
The appliance should be positioned near a
wall, but not directly next to a refrigerator
or deep freezer. The heat emitted from the
microwave would cause the refrigerator or
freezer to consume more energy unneces-
sarily.
There must be a
minimum spacing of 2 m
from
radio devices and televisions
, etc., to
ensure that the reception is not distorted.
Cleaning before first use
The appliance should be cleaned before first
use so that, for example, packaging residue
will not negatively affect the taste of the food.
1. Open the cooking chamber door (5).
(5)
2. Completely empty the cooking cham-
ber (1).
3. Wipe the appliance interior and exterior
with a soft, damp cloth.
4. Leave the cooking chamber door open in
order to allow the cooking chamber to dry
completely.
Set-up and start-up