Page EN-37
First use
The dishwashing results are not satisfactory
Problem
Possible cause
Solution
There are residues or streaks
on the dishes.
The rinse aid is incorrectly
dosed.
Adjust the dosage
(see page EN-15).
There is no dishwasher salt.
Add dishwasher salt
(see page EN-16).
The dishwasher salt is
clumpy.
Stir the dishwasher salt using
the end of a spoon or similar.
The dishes are not completely
clean.
There are food scraps which
are encrusted onto the dishes.
Soak dirty dishes prior to
washing the dishes.
The dishes have not been
stacked optimally.
Stack the dishes so that all
parts can be reached by the
water jets (see page EN-17).
You have selected the incor-
rect dishwashing programme.
Select the correct
dishwashing programme
(see page EN-21).
The dishwasher detergent is
incorrectly dosed.
Use the correct dosage
of dishwasher detergent
(see „Programme table“ on
page EN-21).
The water pressure is too low. Turn the water tap on
completely.
The spraying arm can not
rotate unhindered.
Ensure that no dishes are
impeding the motion of the
spraying arm.
The nozzles on the spraying
arm are blocked/calcified.
Clean the spraying arms
(see page EN-27).
