Assembly
Page EN-19
[
10
11
12
7
18. Screw two mounting rails
7
with four
screws each
10,
four washers each and
11
four nuts
12
in such a way that the
exhaust hood will later hang at the cor-
rect height.
Please note!
The bracket for the mount-
ing rails on top of the motor housing are
approx. 28 cm above the lower edge of
the exhaust hood. Therefore, deduct 28
cm from the ceiling to the desired lower
edge height of the exhaust hood.
[
10
12
11
9
7
19. As shown, screw the assembled mount-
ing rails
10
to the mounting rail bracket
9
with four screws
7,
four washers
11
and
four nuts
12
.
25
6
20.
Only for exhaust air operation:
Attach
the exhaust air hose
6
opening with a
diameter of 153 mm (see marking on the
hose) to the vent opening on the motor
housing in the exhaust hood
1
and se-
cure it with cable ties
25
.
10
7
9
21. As shown, screw the assembled mount-
ing rails
10
and mounting rail bracket
1
with two screws
7
to the motor housing
on the exhaust hood
9
.
7
10
11
12
2
22. Screw the base plate
2
with two screws
10,
two washers
11
and two nuts
12
to
the mounting rails
7
.
