Page EN-18
Dishwasher operation
Selecting the dishwasher
programme
(1)
(4)
(8)
(10)
1. Open the valve completely.
2. Close the dishwasher door.
3. Switch the dishwasher on using the but-
ton (1).
All the lights initially come on on the
display (8). After a short time, the pro-
gramme symbol (10) for the ECO pro-
gramme comes on.
4. Find the right dishwasher programme with
the aid of the “Dishwashing programme
table”, see page EN-17.
5. Press the programme selection button
(4) as many times as required for the
programme you want to light up in the
programme display (10).
The display (8) shows the programme
duration.
6. If you want to
– change the programme again, continue
with „Selecting additional options“ on
page EN-18.
– start the programme, see „Starting the
dishwasher programme“ on page EN-19.
Selecting additional options
(2) (3)
(5)
(8)
(11)
(12)
(15)
You can combine the various dishwashing
programmes (10) with additional options.
Delayed start
The dishwashing process normally starts as
soon as you press the start/pause button
(6). If, however, you do not wish to start the
process until later, you can specify this. The
starting time can be delayed between 1 and
24 hours.
• Press the start delay button (2) as many
times as necessary for the display (8)
to show the delay required (
H:00
,
H:01
to
H:24
).
Selecting wash arm(s)
If only one of the two dish racks is loaded,
you should deactivate the wash arm that is
not required.
– Upper dish rack loaded:
– Lower dish rack loaded:
• Press the button
(3) as many times as
necessary until only the symbol (15) for
the wash arm you require lights up.
Dishwasher operation
