Operation
Page EN-17
■
Never pull the mains cord
out beyond the red marker.
Pulling the cord out further
can damage the cable reel.
(12)
red
yellow
1. Pull the mains cord (12) out
until the yellow marking is visi-
ble on the mains cord.
If the red marking is visible, the
mains cord has been pulled out
too far.
Allow the mains cord to retract
slightly (see section "Finishing
vacuuming" on page EN-18).
2. Connect the mains plug to a
properly installed socket.
(11)
3. Use your foot to operate the
on/off foot switch (11), to
switch the appliance on.
4. To vacuum, push and pull the
nozzle across the surface you
are vacuuming. Rotate the
telescopic tube handle (15)
slightly to reach corners more
effectively. This positions the
nozzle diagonally.
In rare cases this can make
a whistling noise initially.
This is not a malfunction and stops
after a while.
Содержание 504956
Страница 34: ...Technische Daten ...
Страница 66: ......