Hanseatic 504956, Руководство пользователя

Страница: 46 / 66

Appliance parts Page EN-12
The vacuum cleaner comes with
various nozzles designed for a
range of uses. Where required,
before or during vacuuming, each
nozzle can be attached to the tel-
escopic suction hose (15) or the
telescopic tube (16).
Floor nozzle
(22)
(23)
You will work with the floor noz-
zle (22) most of the time as it is
designed for large, flat surfaces.
Best vacuuming results are
achieved when you adapt the ap-
pliance to the floor surface using
the foot selector switch (23).
– For short-pile or smooth floors
such as needle felt, PVC, par-
quet or tiles:
Set the foot selector switch to
position .
– For long-pile rugs/carpets:
Set the foot selector switch to
position .
The foot selector switch can also
be readjusted during operation.
Depending on the floor covering
and degree of dirtiness, you can
adjust the suction force using the
suction force control unit (2) (see
section "Setting the suction force"
on page EN-18).
Turbo brush
(21)
The rotating turbo brush is pro-
pelled by the vacuum air flow. It is
particularly suitable for vacuuming
hair and thread from rugs and car-
peted floors. When using the turbo
brush (21), set the vacuum clean-
er to the maximum suction force
(see section "Setting the suction
force" on page EN-18).