Removing cold water and ice
Page EN-28
3. ICE OFF signal lights up when the ice
maker is locked.
Press the ICE OFF button (31) to unlock
the ice maker.
4. Dispense cold water from the ice maker
until the water flowing from the ice and
cold water outlet (36) is free of bubbles. In
doing so, the ice maker should be flushed
with at least 5 litres of water.
Do not use the water you have used to
rinse the machine.
Follow the instructions described in
chapter “Dispensing crushed ice” on
page EN-28 to rinse the ice maker with
water.
Dispensing crushed ice
(26)
(27)
1. Press the DISPENSER button (26) re-
peatedly until the symbol (27) lights up.
(34)
(36)
2. Hold the vessel as closely as possible
to the opening for the ice/cold water out-
let (36) in order to avoid crushed ice from
spraying out around the sides of the ves-
sel.
3. Push the vessel against the dispenser
guide (34). The vessel will be filled with
crushed ice.
4. To stop the flow of ice, pull the vessel
back slightly from the dispenser guide.
Keep holding the vessel under the ice/
cold water outlet for another 2 seconds to
catch any falling ice.
Dispensing ice cubes
When dispensing ice cubes, use a vessel
with an opening of at least 7 cm to ensure
they drop properly into the vessel.
When you switch the appliance set-
tings from crushed ice dispensing to
“Dispensing ice cubes”, residual
crushed ice will be initially dispensed from the
ice/cold water outlet.
(26)
(28)
1. Press the DISPENSER button (26) re-
peatedly until the symbol (28) lights up.
