Page EN-21
Dishwasher operation
Before getting started
• Read chapter “Safety” from page EN-4, in
particular the safety instructions.
• Set up and connect the appliance as
described in chapter “Installation, con-
nection and initial commissioning” from
page EN-30.
• Refill dishwasher detergents, rinse aids
and dishwasher salts or multi-tabs.
Preparation
1. Open the tap completely.
2. Close the dishwasher door.
3. Press the button (18) to switch on the
dishwasher.
You will hear a signal tone and all indica-
tors will illuminate briefly.
After a short time, the programme display
reading
ECO
(1) will show.
Protecting the environment
– The ECO programme is the most efficient
programme for cleaning normally soiled
dishes in terms of combined energy and
water consumption.
– If you keep to the maximum specified ca-
pacity when loading your appliance and
you arrange the dishes correctly, energy
and water can be saved (see “Loading the
dishwasher” on page EN-16).
– Manual pre-rinsing of the dishes leads
to higher water and energy consumption
and is not recommended.
– Cleaning dishes in your appliance gen-
erally uses less energy and water than
washing by hand, provided you follow the
instructions in the user manual.
Selecting the dishwashing
programme
It is recommended that you carry
out a test run before the first dish
-
washer cycle in order to remove residues
from the manufacturing process and in
order to ensure that the appliance functions
perfectly. Carry out this test run when the
dishwasher is empty and without any dish-
washer detergent.
1. Select the suitable dishwashing pro-
gramme based on the “programme ta-
ble”, see page EN-20.
(13)
(6)
(1)
2. Press the
P
button (13) as often as re-
quired until the display shows the de-
sired programme indicator (1) and the
programme duration (6).
3. For the washing programme,
– if you wish to make further adjust-
ments, continue with “Additional op-
tions”.
– if you wish to launch it, continue
with “Starting the dishwashing pro-
gramme” on page EN-23.
Additional options
You can combine the various dishwashing
programmes with additional options. The
additional options must be selected before
starting the dishwashing programme.
Dishwasher operation
