Hansa C60RX, Руководство по эксплуатации, техническому обслуживанию и безопасности

Страница: 24 / 32

Hansa C60 RX O&M Manual
– OM-015 Revision E 23/10/2019
© Hansa Chippers 2019
22
Maintenance & service intervals
Maintenance interval - service hours
10 or 50 or 100 250 500 or 1000 Yearly As req.
Service
Daily Weekly Biannually
Engine oil change - initial change
Initial
Hydraulic oil filter - initial replacement
Initial
Belt tension – initial check
Initial
Track tension – initial check
Initial
Engine oil level – check •
Coolant level - check •
Radiator screen – check/clean •
Air cleaner element – clean • •
Bearings – grease •
Engine engagement rod – grease •
Outlet swivel – grease •
Knives – check, sharpen or replace • •
Belt guarding – remove and clean chip build-up • •
Drive belts tension - check/adjust •
Hydraulic pump belt tension - check/adjust •
Fan belt – check •
Engine oil & filter – change •
Nuts & bolts – check torque •
Track gearbox oil – initial change Initial
Hydraulic system – check •
Spring mounting – check U bolts •
Brake fluid - check •
Hydraulic oil filter - replace •
Battery electrolyte level & terminals - check •
Engine fuel filter – replace •
Outlet chute – remove & clean swivel •
Feed roller tension springs - replace • •
Anvil - check • •
Air cleaner element – replace •
Track tension - check •
Hydraulic oil & filter – replace •
Track gearbox oil - replace •
Feed roller teeth – sharpen • •
Engine system •
Battery – replace •
Drive belts – replace •
Hydraulic pump belt – replace •
Knives – replace •
Anvil – replace •
Hazard labels – replace •