Hans Grohe ShowerSelect 15760 0 Series, Руководство по сборке

Страница: 6 / 72

English
�
Safety Notes
�
Gloves should be worn during installation to prevent
crushing and cutting injuries.
�
The product may only be used for bathing, hygienic
and body cleaning purposes.
�
Children as well as adults with physical, mental and/
or sensoric impairments must not use this product
without proper supervision. Persons under the
influence of alcohol or drugs are prohibited from
using this product.
�
The hot and cold supplies must be of equal
pressures.
Installation Instructions
• Prior to installation, inspect the product for transport
damages. After it has been installed, no transport or
surface damage will be honoured.
• The pipes and the fixture must be installed, flushed
and tested as per the applicable standards.
• The plumbing codes applicable in the respective
countries must be observed.
• This mixer cannot be used in conjunction with
hydraulically, electronically or thermally controlled
instantaneous heaters.
Technical Data
Maintenance
(see page 68)
• The check valves must be checked regularly
according to EN 806-5 in accordance with national
or regional regulations (at least once a year).
• To guarantee the smooth running of the thermostat, it
is necessary from time to time to turn the thermostat
from total hot to total cold.
Dimensions
(see page 71)
Flow diagram
(see page 71)
free flow
Spare parts
(see page 70)
XX
00
14
25
34
40
60
67
70
95
99
= Colors
= Chrome Plated
= Brushed Bronze
= Brushed Gold-Optic
= Brushed Black Chrome
= White/Chrome Plated
= Black/Chrome Plated
= Matt Black
= Matt White
= Brushed Brass
= Polished Gold-Optic
+
Special accessories (see page 70)
(order as an extra)
• extension 25 mm #13595000
• Extension Set 22 mm (when wall is not deep
enough)#13597XX0, #13593XX0,
#13604000
• levelling set 1° #95521000
Cleaning
(see page 72)
Operation
(see page 65)
Test certificate (see page 65)
Operating pressure:
Recommended operating pressure: max. 1 MPa
0,1 - 0,5 MPa
Test pressure: 1,6 MPa
(1 MPa = 10 bar = 147 PSI)
Hot water temperature: max. 70°C
65°C
70°C / 4 min
Recommended hot water temp.:
Thermal disinfection:
• Safety against backflow
• The product is exclusively designed for drinking
water!
Symbol description
Do not use silicone containing acetic acid!
Safety Function
(see page 66)
The desired maximum temperature for example max.
42º C can be pre-set thanks to the safety function.
Adjustment (see page 65)
After the installation, the output temperature of the
thermostat must be checked. A correction is necessary if
the temperature measured at the output differs from the
temperature set on the thermostat.
6