7
Assembly see page 60
Fault
Cause
Remedy
Insufficient water
-
Supply pressure inadequate
-
Check water pressure (If a pump
has been installed check to see if
the pump is working).
-
Regulator filter dirty
-
Clean filter in front of the mixer and
on the MTC-thermo cartridge
-
Shower filter seal dirty
-
Clean filter seal between shower
and hose
Crossflow, hot water being forced
into cold water pipe, or vice versa,
when mixer is closed
-
Backflow preventers dirty or leaking
-
Clean backflow preventers, ex-
change if necessary
Spout temperature does not cor-
respond with temperature set
-
Thermostat has not been adjusted
-
Adjust thermostat
-
Hot water temperature too low
-
Increase hot water temperature to
42 ºC to 65 ºC
Temperature regulation not possible
-
Temperature regulator dirty or calci-
fied
-
Clean temperature regulator, ex-
change if necessary
-
For new installations: basic body
incorrectly connected (should be:
cold right, hot left) or installed with
180º rotation
-
Install function block turned through
180º
Safety stop button not operating
-
Spring defective
-
Button calcified
-
Clean spring and/or button, ex-
change if necessary
Valve stiff
-
Select stop valve DN9 damaged
-
Exchange Select stop valve DN9
Shower or spout dripping
-
Select stop valve DN9 damaged
-
Exchange Select stop valve DN9
Pushbutton cannot be actuated or is
without function
-
Safety guard of isolating valve has
not been removed
-
Remove safety guard from isolating
valve
Pushbutton is jammed or stiff
-
Seal needs greasing
-
Grease the seal
Test certificate
(see page 72)
Cleaning
see enclosed brochure.
Spare parts
(see page 72)
English
Operation
(see page 71)
Minor leaking may occur briefly during
initial commissioning and interruption/restart
of the water supply.
Содержание Shower Select S 15743000
