Hans Grohe Modern, Инструкция по использованию/Инструкция по сборке

Страница: 6 / 72

6
Assembly see page 62
Special accessories (see page
68) order as an extra
13595000 extension set 28 mm
13596000 Extension Set 22 mm (when
wall is not deep enough).
98860000 Extension Set 22 mm (when
wall is not deep enough).
Spare parts (see page 68)
Cleaning
see enclosed brochure.
Operation (see page 67)
Dimensions
(see page 60)
Adjustment (see page 66)
It is necessary to check the water
temperature at the take off point. When
the valve is first opened, it should be cold,
and become warmer as the handle is
turned. If the valve opens from hot to cold,
the cartridge must be reversed.
Safety Function (see page 65)
If the maximum high temperature is hotter
than 42°, reset the high temperature limit.
Do not use silicone containing acetic acid!
Symbol description
6 6
Safety Notes
6
Gloves should be worn during installation to
prevent crushing and cutting injuries.
6
Children as well as adults with physical, mental
and/or sensoric impairments must not use this
shower system without proper supervision. Per-
sons under the influence of alcohol or drugs are
prohibited from using this shower system.
6
The shower system may only be used for bathing,
hygienic and body cleansing purposes.
6
The hot and cold supplies must be of equal
pressures.
6
This valve is for a one-function installation only.
6
Do not use this valve in combination with a
volume control valve.
Installation Instructions
The fitting must be installed, flushed and tested after
the valid norms.
Prior to installation, inspect the product for transport
damages. After it has been installed, no transport or
surface damage will be honoured.
Technical Data
Operating pressure: max. 1 MPa
Recommended operating pressure: 0,1 – 0,5 MPa
Test pressure: 1,6 MPa
(1 MPa = 10 bar = 147 PSI)
Hot water temperature: max. 80°C
Recommended hot water temp.: 65°C
Rate of flow by 0,3 MPa: approx. 17 l/min
anti-pollution function
The product is exclusively designed for drinking
water!
English