2
English
Technical Information
Water pressure
Recommended
15 - 75 PSI (1-5 Bar)
Maximum
145 PSI (10 Bar)
Hot water temp.
Recommended
120°-140° F (48° -60° C)*
Maximum
158°F (70° C)*
Max. flow rate
1.2 GPM (4.5 L/min)
32527XX1, 74524XX1 0.5 GPM (1.9 L/min)
Hole size in mounting surface
1⅜" (34 mm)
Max. depth of mounting surface
1⅝" (40 mm)
* Please know and follow all applicable local plumbing
codes when setting the temperature on the water heater.
Installation Considerations
• For best results, Hansgrohe recommends that
this unit be installed by a licensed, professional
plumber.
• Please read over these instructions thoroughly
before beginning installation. Make sure that you
have all tools and supplies needed to complete the
installation.
•
Models 32505XX1, 32510XX1, 32513XX1,
74505XX1, 74510XX1, 74513XX1 only
:
This faucet does not include a drain or a pull rod.
• Models 32506XX1, 74506XX1, 2527XX1,
74524XX1 only:
The drain is suitable for
most, but not all, lavatory sinks sold in the United
States and Canada. This drain is intended for
use in a sink with an overflow. If your sink does
not have an overflow, or if this drain is too small
for the hole in your sink,
please refer to the
instructions included with the sink
. Some
sinks include special drain installation instructions
and/or parts. Others require the use of a specialty
drain. Hansgrohe is not respnsible for the cost of a
specialty drain.
The hot and cold supply hoses included
with this faucet are for use with ⅜ stops.
If your stops are a different size, purchase
adapters at your local plumbing supply
store or home center. Adapters are not
available from Hansgrohe.
• Keep this booklet and the receipt (or other proof
of date and place of purchase) for this product in
a safe place. The receipt is required should it be
necessary to request warranty parts.
