14
English
Attention!
The fitting must be installed, flushed and tested
after the valid norms!
Adjustment
Correction is necessary if the temperature measured at the
take off point differs from the temperature set on the scale.
To adjust temperature proceed as follows:
Turn the setting knob until water at a temperature of 38°
C comes out of the outlet. Loosen screw of setting knob.
Remove setting knob and turn to the 38° C position.
Attach setting knob again and tighten the screw (please
see page 69).
Temperature limitation
The temperature is limited by the safety check to 38°
C (100° F). If a higher temperature is required, it is
possible to override the safety stop by depressing the
safety button.
Safety Function
The desired maximum temperature for example max. 42°
C can be pre-set thanks to the safety function (please see
page 68).
Technical Data
Operating pressure:
max. 1 MPa
Recommended operating pressure:
0,1 - 0,5 MPa
Test pressure:
1,6 MPa
(1 MPa = 10 bars = 147 PSI)
Hot water temperature:
max. 80° C
Recommended hot water temp.:
65° C
Rate of flow by 0,3 MPa
approx. 26
l/min
Test certificate:
WRAS
MCA
Maintenance
There is no special maintenance for thermostats. The non
return valves (
) must be checked regularly according
to DIN EN 1717 in accordance with national or regional
regulations (at least once a year). At this time, please
also check the filter (
1.1
) situated on the MTC-thermo-
element (
1
). After assembling the MTC-thermo-element,
it is necessary to check the water temperature at the take
off point as described under the headline „adjustment“.
Before the adjustment, please check, if the warm water
supply is activated and the maximum temperature of the
warm water is available at the take off point.
To guarantee the smooth running of the thermostat, it is
necessary from time to time to turn the thermostat from
total hot to total cold.
Spare parts
(see page 4+5)
handle for thermostat Starck
10391XXX
handle for thermostat Carlton „lever“ 17391XXX
handle for thermostat Carlton „cross“ 17994XXX
handle for thermostat Steel
35391800
handle for thermostat Allegroh
36391XXX
handle for thermostat Terrano „lever“ 37391XXX
handle for thermostat Terrano „cross“ 37994XXX
handle for thermostat
Uno/Citterio M
38391XXX
handle for thermostat Montreux
16594XXX
screw cover for cold / hot water
97987000
handle for thermostat Citterio „lever“ 39994XXX
handle for thermostat Citterio „cross“ 39391XXX
handle for thermostat Massaud
18097000
face plate Massaud
98688000
face plate
96551XXX
face plate Citterio cpl.
96751XXX
face plate Starck X
97926000
face plate Montreux
98638XXX
face plate Citterio M
98919000
sleeve
96439XXX
thermostat cartridge
94282000
noise reduction
94073000
non return valve
94074000
shut off unit with selector
96509000
sub plate
96447000
fixing screw
96454000
sleeve
96446XXX
handle Starck/Citterio
Massaud/Citterio M
96520XXX
handle Uno/Terrano/Steel
96421XXX
handle Carlton/Allegroh
96449XXX
handle Montreux
98637XXX
extension set 25 mm
13595000
extension set 22 mm
13596XXX
extension set 22 mm
Citterio / Starck X
97407XXX
extension set 22 mm Citterio M
98860000
adapter for handle
96435000
adapter for handle
96451000
sleeve Massaud
98734000
adapter for handle Massaud
98701000
sealing set
95037000
screw
96525000
1�
2�
3�
4�
5�
6�
7�
8�
9�
10�
11�
12�
13�
14�
15�
16�
17�
18�
19�
20�
21�
22�
23�
24�
25�
26�
27�
28�
29�
30�
31�
32�
33�
34�
35�
36�
37�
38�
39�
40�
41�
Содержание AXOR Starck 10720 Series
