Hans Grohe Axor Starck 10616 Series, Руководство по сборке, Страница: 22 / 233

6
Assembly
Important! The fitting must be installed, flushed
and tested after the valid norms!
Operation
The mixer is activated by pulling the lever
handle. Move to the left = hot water,move to the
right = cold water.
Technical Data
Operating pressure:
max. 1 MPa
Recommended operating pressure: 0,1 – 0,5
MPa
Test pressure:
1,6 MPa
(1 MPa = 10 bar = 147 PSI)
Hot water temperature:
max. 80° C
Recommended hot water temp.: 65° C
Rate of flow: ca. 32 l/min 0,3 MPa
Hansgrohe single lever mixers can be used
together with hydraulically and thermically
controlled continuous flow heaters if the flow
pressure is at least 0,15 MPa.
To adjust the hot water limiter on single lever
mixers, please see page _1b.
No adjustment is necessary when using a
continuous flow water heater.
Spare parts see page 3
1
handle Stark / Stark X 10490XXX
1.1 screw cover 96338000
2 handle Uno „Zero“ 38090XXX
3 handle Uno 38091XXX
4 handle Uno² 98553XXX
5 handleCitterio 39491XXX
6 handleCitterio M 34096000
7 flange Starck / Uno 96452XXX
8 flange Citterio 96749XXX
9 flange Starck X 97449000
10 flange Citterio M 98968000
11 flange (Rotating Protector) 96395XXX
12 fixing screw 96454000
13 sub plate 96447000
14 nut 96461000
15 locking screw for handle 96059000
16 noise reduction 94073000
17 cartridge cpl. 92730000
18 seal 95008000
19 extension 25 mm 13595000
XXX
= Colors
000 chrome plated
810 satinox®
English