Hans Grohe AXOR Starck 10411 Series, Руководство по сборке

Страница: 22 / 207

English
6
Important! The fitting must be installed, flushed
and tested after the valid norms!
Technical Data
Operating pressure:
max. 1 MPa
Recommended operating pressure: 0,1-0,5 MPa
Test pressure: 1,6 MPa
(1 MPa = 10 bar = 147 PSI)
Rate of flow:
ca. 17 l/min 0,3 MPa
Hot water temperature: max. 80°C
Recommended hot water temp.: 65°C
Centre distance: 150 ± 16 mm
Connections G ½": cold right - hot left
Back flow and vacuum breaker
The hot and cold supplies must be of equal
pressures.
To adjust the hot water limiter on single lever
mixers, please see page 7.
No adjustment is necessary when using a
continuous flow water heater.
Hansgrohe single lever mixers can be used
together with hydraulically and thermically
controlled continuous flow heaters if the flow
pressure is at least 0,15 MPa.
Spare parts (see page 3)
1 poignée
10093XXX
screw cover 96762000
2 flange 96763XXX
3 nut 97209000
4 cartridge cpl. 92730000
5 flange 97507XXX
6 noise reduction 96429000
7 S - unions 96742000
8 selector 96297000
9 aerator cpl. 96296XXX
10 selector assy 96294XXX
11 non return valve DW 15 94074000
XXX
= Colors
000 chrome plated
810 satinox®
Test certificate
DVGW P-IX SVGW ACS NF WRAS KIWA
10411XXX
PA-IX
9700/ICB
X
10611XXX
IA-IX
9688/IB
X X
Important!
The non return valves must be checked regularly according
to DIN EN 1717 in accordance with national or regional
regulations (at least once a year).