Hans Grohe AXOR Starck 10402000, Руководство по сборке

Страница: 20 / 231

4
Assembly
1
Flush through the supply pipes.
2 Mount the S - unions and align them.
3 Fasten the mixer with the washers.
The hot and cold supplies must be of equal
pressures.
Operation
The mixer is activated by lifting the lever handle.
Turning to the left = warmer water,
turning to the right = cooler water.
10402000: The flow is changed from bath to
shower function by pulling the knob at the upper
side of the spout. After shutting off the water
flow, the mixer returns automatically to the bath
function.
Technical Data
Operating pressure:
max. 1 MPa
Recommended operating pressure: 0,1 – 0,5
MPa
Test pressure:
1,6 MPa
(1 MPa = 10 bar = 147 PSI)
Hot water temperature:
max. 80° C
Recommended hot water temp.: 65° C
Centre distance:
Connections G ½":
cold right - hot left
Rate of flow: ca. 22 l/min 0,3 MPa
To adjust the hot water limiter on single lever
mixers, please see page 6.
No adjustment is necessary when using a
continuous flow water heater.
Hansgrohe single lever mixers can be used
together with hydraulically and thermically
controlled continuous flow heaters if the flow
pressure is at least 0,15 MPa.
Spare parts see page 3
1 handle
10490000
1.1 screw cover 96338000
2 flange 96395000
3 nut 96461000
4 cartridge cpl. 92730000
5 flange 96467000
6 S-union 94140000
7 spray former cpl. 97467000
8 selector assy 94077000
9 diverter knob 96466000
10 non return valve 94074000
11 noise reduction 96429000
12 hose 28282000
13 filter packing (25) 94246000
14 hand shower 28531000
English