Assembly see page 4
Installation putty order as an extra
special tool (58085000) order as an extra
Special accessories
Spare parts
(see page 8)
Cleaning
see enclosed brochure.
Operation
(see page 6)
Hansgrohe recommends not to use as
drinking water the first half liter of water
drawn in the morning or after a prolonged
period of non-use.
Flow diagram
(see page 7)
with EcoSmart
®
without EcoSmart
®
Dimensions
(see page 7)
Do not use silicone containing acetic acid!
Symbol description
6
Safety Notes
6
Gloves should be worn during installation to prevent
crushing and cutting injuries.
6
The shower system may only be used for bathing,
hygienic and body cleansing purposes.
6
The hot and cold supplies must be of equal
pressures.
Installation Instructions
• The fitting must be installed, flushed and tested after
the valid norms.
• Prior to installation, inspect the product for transport
damages.
• After it has been installed, no transport or surface
damage will be honoured.
• If the instantaneous water heater causes problems or
if you wish to increase the water flow, the EcoSmart
®
(flow limiter) located behind the aerator can be
removed.
Technical Data
This mixer series-produced with EcoSmart
®
(flow
limiter)
Operating pressure:
max. 1 MPa
Recommended operating pressure:
0,1 – 0,5 MPa
Test pressure:
1,6 MPa
(1 MPa = 10 bar = 147 PSI)
Hot water temperature:
max. 80°C
Recommended hot water temp.:
65°C
Thermal disinfection:
max. 70°C / 4 min
Hansgrohe mixers can be used together with
hydraulically and thermically controlled continuous flow
heaters if the flow pressure is at least 0,15 MPa.
The product is exclusively designed for drinking water!
English
3
Содержание AXOR Starck 10111009
Страница 4: ...4 1 4 2 3 6 1 2 SW 10 mm SW 24 mm 5 1 2 3 4 10 Nm 7 Nm ...
Страница 5: ...5 11 11 58085000 10 11 12 9 7 58085000 8 9 50 Ncm ...
Страница 6: ...6 13 15 14 2 min schließen close öffnen open warm hot kalt cold ...
Страница 7: ...7 Starck 10111009 10120009 Starck 10111009 Starck 10120009 94139000 94139007 ...
