Assembly
18430XXX/18630XXX/17430XXX/
17630XXX/13432XXX/13630XXX
1. Flush through the supply pipes.
2. Mount the ball S - unions.
3. Fasten the mixer using ball union nuts, align and
tighten it.
The ball - S - unions enable inaccuracies in the
wall installation to be compensated for, whether
in the horizontal direction, in the vertical
direction or in the parallel orientation.
4. Screw the escutcheons down to the wall.
Large differences in pressure between the hot and
cold water supply should be balanced.
Assembly
18470XXX/17470XXX/13770XXX
1. Flush through the supply pipes.
2. Mark the holes on the bath rim and drill (centre
distance 150 mm).
3. Mount the elbow unions with O-rings and
escutcheons.
4. Fasten the mixer and tighten it.
Large differences in pressure between the hot and
cold water supply should be balanced.
Technical Data
Operating pressure:
max. 10 bars
Recommended operating pressure:
1 - 5 bars
Test pressure:
16 bars
Hot water temperature:
max. 80° C
Connection dimensions:
G ½"
Recommended hot water temperature: 65° C
Rate of flow by 3 bars:
25 l/min
Back flow and vacuum breaker
English
Spare parts
1
knob for cold water Uno
13291XXX
knob for cold water Carlton
17291XXX
knob for cold water Mondaro
18291XXX
2
knob for hot water Uno
13292XXX
knob for hot water Carlton
17292XXX
knob for hot water Mondaro
18292XXX
3
aerator cpl.
13485000
aerator gold plated
94981990
4
spout cpl.
92440XXX
5
selector cpl.
94103000
6
diverter knob
94102XXX
7
stop unit
94149000
8
ball S-unions
13989000
ball S-unions 120 - 180 mm
13988000
9
pillar union
92470XXX
XXX
= Colors Uno
030 chrome/blue
060 chrome/black
060 chrome/green
330 blue
430 red
450 white
480 yellow
610 black
XXX
= Colors Carlton
000 chrome plated
090 chrome/gold plated
810 satinox
®
840 fine brass
XXX
= Colors Mondaro
000 chrome plated
010 chrome/gold/jewel
090 chrome/gold plated
490 white/gold plated
840 fine brass
