Hans Grohe Axor 13444181, Инструкция пользователя

Страница: 14 / 24

14
English
(1) Place the Secuflex holder on the mounting surface
so that the positioning pin faces away from the
bather.
() Install the mounting nut, metal washer, and friction
washer.
If the mounting surface is thin, install the spacers.
Otherwise discard them.
(3) Tighten the mounting nut.
(4) Tighten the tensioning screws.
(1) Install the hose guide.
() Push the Secuflex hose down through the holder.
(3) Remove the o-rings from the Secuflex hose.
(4) Install the hot and cold supply lines.
(1) Lightly lubricate the o-rings on the top of the
Secuflex hose.
() Install the plug on the spout base.
(3) Remove the plug from the high pressure hose.
(4) Turn the water on and flush the supplies.
1
97864000
10
11
12
1
3
4
1
3
4
3
4