4
Safety Notes
Gloves should be worn during installation to prevent
crushing and cutting injuries.
The hot and cold supplies must be of equal pres-
sures.
71813000: Only dishwashers and washing
machines certified with the DVGW emblem may be
connected to the appliance connection valve without
an additional fuse.
Installation Instructions
• Prior to installation, inspect the product for transport
damages. After it has been installed, no transport or
surface damage will be honoured.
• The pipes and the fixture must be installed, flushed
and tested as per the applicable standards.
• The plumbing codes applicable in the respective
countries must be observed.
Technical Data
Operating pressure:
max. 1 MPa
Recommended operating pressure:
0,1 - 0,5 MPa
Test pressure:
1,6 MPa
(1 MPa = 10 bar = 147 PSI)
Hot water temperature:
max. 70°C
Recommended hot water temp.:
65°C
Thermal disinfection:
max. 70°C / 4 min
The product is exclusively designed for drinking water!
English
Cleaning
(see page 46)
Operation
(see page 43)
• Hansgrohe recommends not to use as
drinking water the first half liter of water
drawn in the morning or after a pro-
longed period of non-use.
• 71805000 / 71809000: After periods of
prolonged non-use, but at least every third
day, the fittings must be opened with the
handle in hot and cold position to prevent
stagnation in the connecting lines. Let the
water run until the water temperature is
constant.
Spare parts
(see page 39)
XXX = Colors
000 = chrome plated
800 = stainless steel optic
Dimensions
(see page 35)
Do not use silicone containing acetic acid!
Symbol description
Flow diagram
(see page 38)
Assembly
(see page 31)
Adjustment
(see page 34)
To adjust the hot water limiter. Using a hot
water limiter in combination with a continu-
ous flow water heater is not recommended.
Test certificate
(see page 48)
Содержание 71805000
Страница 33: ...33 2 min SW 22 mm 2 Nm 8 9 ...
Страница 43: ...43 M423 H120 71807000 m in 55 m m 1 2 1 2 3 4 ...
Страница 47: ...47 ...