[Number key]
to enter frequency selection with number key and press “EN” to confirm.
1-2: Take a channel: After channels are stored, press “PRESET” to take a
channel. Directly press the number key to take a channel and press “EN” to
confirm.
1-3: Address of manually storing a channel: long press “PRESET” to enter the
mode of manual channel storing. Press the number key to select an address of
channel storing, and lightly press “PRESET” to confirm.
2: In the mode of TF card, lightly press this button and “EN” to select a music.
EN
1: In the mode of receiving, lightly press this button to select a frequency using
the umber key and press it again to confirm.
2: In the mode of TF card, lightly press this button and “ ” to select a music.
[Push lock]
1: Push the switch to the position of “UN” and all keys and knobs are not locked.
2: Push the switch to the position of “RS-LOCK”, and the shuttle knobs are
locked.
3: Push the switch to the position of “......LOCK’ and all keys and knobs are
locked (the state of lock)
When the radio is working, lightly press this button to switch between NORMAL,
POP, ROCK, JAZZ, CLASSIC, COUNTRY, NEWS, VOICE, DAC-ANALOG
AND CW
[Jack of TF card]
When the radio is working, insert the TF card to play the music in TF card first.
[Earphone output]
When the radio is working, insert the 3.5MM earphone to listen to the radio and
cancel the loud speaker.
[Audio input]
When the radio is working, inset the 3.5mm external audio source and play the
music of external source first.
[TYPE-C jack]
1: Charging jack
2: Connect to the audio output jack of computer
3: Connect to the computer with USB cable. Used as the TF card reader.
[On the right of the radio]
When external T-shaped antenna is used in the mode of MW/SW, press this
button to adjust the signal to noise ratio and antenna field intensity. The higher
RSSI and SNR values are, the better.