Note: The day of week including MON, TUE, WED, THU, FRI, SAT and SUN will be updated automatically
as the date is updated.
13: Set the alarm clock
After setting the running time as shown in Section 12, in the state of time display, long press
“ALARM” for 2 seconds to set the alarm clock time/scheduled power on
(Two sets of alarm clocks can be set as needed) as follows:
Step1:On the time display state
Step2:Long press [ALARM] button
Step3:When the digit 1 or 2 is flashing
Turn the big/small shuttle knob[ ] to adjust set any set of alarms
Step4:Short press [ALARM] button
Step5:When ON/OFF is flashing
Turn the big/small shuttle knob[ ] to elect
turn on the alarm or turn off the alarm
[ON] is turn on the Alarm.[OFF] is turn off the Alarm.
Step6:After elect [ON] to turn on the Alarm,short press[Alarm]button
Step7:Alarm hour digit[ ] is flashing
Step8:Turn the big/small shuttle knob[ ] to adjust alarm hour.
Step9:Short press[Alarm]button
Step10:Alarm Minute[ ] is flashing
Step11:Turn the big/small shuttle knob[ ] to adjust alarm minute.
Step12:Short press[Alarm]button elect [Alarm time ]or [timed power on time]
Turn the big/small shuttle knob[ ] to elect either one
[ ]symbol is Alarm time.
[ ]symbol is timed power on time
Step13:After elect the [ ]
Short press[Alarm]button,Turn the big/small shuttle knob[ ] to elect
Four ringtones [ ]
Short press[Alarm]button for confirm
After elect the [ ]
Short press [Alarm]button,Turn the big/small shuttle knob[ ] to elect Timed shutdown time after
timed power on.can be elected:10-20-30-40-50-60-70-80-90-FULL (Unit:minute)
If elect FULL(mean the radio will not automatically shut down after automatic power on)
Step14:After setting alarm function.the Alarm symbol[
] is display on the Second screen.