27
14.4.1
Bandwidth setting on AIR:
Short press [
SET
] for the first time. When the bandwidth (BW)
flashes, short press [
MODE
] to set the bandwidth to be 6.00KHz,
4.00KHz, 3.00KHz, 2.50KHz, 2.00KHz, 1.80KHz and 1.00KHz.
14.4.2
Squelsh level (SQ) adjustment:
Short press [
SET
] for the second time, SQ (SQ.OFF.00) will flash; then,
short press [
MODE
] to select SQ of (SQ.ON.01.-SQ.ON.09).
Short press [
SET
], "VOL SQ" stop flashing. -And also no operation
within 5 seconds, default current operation. Short press [
MODE
] to
select (SQ.OFF.00) and the SQ will be closed.
14.4.3
ATT adjustment on AIR:
Short press [
SET
] for the third time, ATT/DX/LOCAL/NORMAL display
will be flashing.
Then, short press [
SET
] to select ATT/DX/L0- CAL/NORMAL settings.
Short press [
SET
] again,ATT/DX/LOCAL/NORMAL display will stop
flashing. (DX) or (LOCAL) will exit if there is no operation within five
seconds and the work will be switched to be the current default
setting.
Содержание HRD-747
Страница 6: ...6 Front view Right view and back view of the product...
Страница 33: ...33 Main technical parameters...
