24
Short press [SET] for the fifth time, "
STEREO
" or "
MONO
" will flash at
this time, press lightly press [
MODE
] to choose stereo or mono. Then
press [
SET
] to confirm the current operated. And also no operation
within 5 seconds, default current operation.
4.3
SW receiving state
14.3.1
Bandwidth setting on SW:
Short press [
SET
] for the first time, bandwidth "BW" flashes, short
press [
MODE
] to set the bandwidth to be 3.00KHZ, 2.50KHZ, 2.00KHZ,
1.80KHZ, 1.00KHZ, 6.00KHZ and 4.00KHZ
14.3.2
Squelsh level (SQ) adjustment:
Short press [
SET
) for the second time, "
SQ.OFF.00.0N
" flashes. Short
press [
MODE
] to select SQ level, which has 9 levels (SQ.ON.01-
SQ.ON.09). Then short press [
SET
] to confirm the SQ level you need.
"VOL SQ" will be flashing in the screen.
And also no operation within 5 seconds, default current operation. -If
the SQ function is not required, press the above operation to switch
to VOL SQ OFF to turn OFF the automatic noise function.
14.3.3
ATT adjustment on SW:
Short press [
SET
] for the third time, ATT, NORMAL, DX or LOCAL is
flashing.
Short press [
MODE
] to select ATT, NORMAL, DX or LOCAL setting.
After that, short press [
SET
] to confirm the setting. ATT, NORMAL, DX
or LOCAL will stop flashing.
Содержание HRD-747
Страница 6: ...6 Front view Right view and back view of the product...
Страница 33: ...33 Main technical parameters...
