Page 4
ASSEMBLY INSTRUCTIONS
1
2
Attach the seat frame to the back frame by using four 5/16"x40 mm bolts and washer as shown in
Guide these bolts through the holes in the seat frame, into the fixed nuts already in place in the back frame.
Figure 1.
.
Do not over tighten
Attach love seat arm by inserting two
mm bolts with washers through the holes in front seat portion
of the love seat frame and into the holes in the love seat arm shown in
. Attach back of love seat arm
by inserting two
mm bolts with washers through holes in the back portion of love seat frame and into
the holes in the rear portion of the love seat arm as shown in
.
. Repeat for the
opposite side.
Figure 2
Figure 2
Hand tighten only
5/16"x25
5/16"x40
A
B
H
F
G
C
D
G
E
H
G
FOOT CAP-1
F
H
G
E
H
G
F
H
3
Tighten all bolts using the hex bolt driver provided. Tighten each bolt a few revolutions at a time, alternating
between bolt connections until all bolts are tight.
Cover all bolts with bolt covers provided.
Do not over tighten. Over tightening may strip bolts or
damage the welds or frame.
