Hanover Orleans ORL4PCDFPSW2-BRY Скачать руководство пользователя страница 3

Page 3

Care & Maintenance

Outdoor furniture can be enjoyed for many years when well maintained.

Regular Maintenance

Wash the furniture with a solution of mild detergent and water, rinse with clear water, and dry thoroughly. To all metal frames, apply a
fine, clear automobile wax for maximum protection against harmful ultraviolet exposure and salt air.

For best protection, perform this maintenance two or three times per year in low pollution areas or more frequently in high pollution
areas. Please note that these durable materials can be safely cleaned as often as desired. Note: Some suntan and sun block products
may be harmful to resin, cushions and strap, mesh and vinyl lace and strap. Do not allow such products to come in contact with any
seating surfaces to avoid deep penetrating stains, which are not covered under warranty.

How to Clean & Care for Teak Furnishings

Left alone to age, the natural color of teak furnishings will weather to a soft, silver grey. This process will take approximately nine
months, depending on the degree of sunlight and rain exposure. Imperfections, which are inherent properties of the wood, will show 
over time, enhancing the beauty of the furniture. In humid or wet climates, or after rains, the wood may naturally expand and contract, 
causing the grain to rise. This is to be expected with exposure to the elements and will stabilize after the initial weathering occurs.
To maintain teak furnishings, use a soft bristled utility brush and stroke lightly in the direction of the grain to remove surface dust. For
more stubborn dirt, the wood may be washed with a mild solution of four parts laundry detergent or dish washing soap to one part 
bleach in water, then rinsed thoroughly and allowed to dry completely. Oiling the wood may cause mildew or irregular coloring.

How to Clean Woven Furnishings

Woven furnishings are made of durable and weatherproof extruded polyethylene resin weave. Light stains and soils may be removed 
with a solution of mild detergent and water, rinsed with clear water and dried thoroughly. Mildew and heavy stains can be removed with 
a quality commercial outdoor furniture cleaner and protectant. Woven furnishings may not be suitable for intensely hot climates.

How to Clean Fabric

Fine outdoor fabrics are designed to endure years of sun, soil and moisture. Wash outdoor cushions with a solution of mild detergent 
and water and thoroughly rinse with clear water. Stand cushions on end and allow to air dry completely. Light stains can be removed as
above. Mildew and heavy stains can be removed with a quality commercial outdoor furniture cleaner and protectant. Note: Do not dry
clean or use a washing machine or dryer. Do not steam or use water at temperatures above 100º F when washing. Note: Be careful to
keep the outdoor furniture cleaner from contact with the cushions of your outdoor furniture, as it will cause discoloration. Do not use
bleach on printed acrylic fabrics. Do not use solvent-type materials on woven vinyl, woven blend or ultra woven blend fabrics as they 
will damage the yarns. Do not use chlorine based cleaners.

How to Clean Mesh

Remove light stains with a solution of mild detergent and water, then rinse with clear water and dry thoroughly. Mildew and heavy 
stains can be removed with a quality commercial outdoor furniture cleaner and protectant. 

How to Clean Strap

For general or light cleaning, begin by brushing dirt off the strap. Apply a solution of mild detergent and warm water and allow it to soak
into the strap. Gently clean with a sponge or soft bristle brush, then rinse thoroughly with clear water and allow the strap to air dry.

How to Clean Vinyl Strap

Apply a quality vinyl protectant to guard against the effects of air pollution, salt air build-up, and mildew. To remove difficult stains use
rubbing alcohol applied with a soft cloth.

How to Clean & Care for Stone and Marble Tops

Tabletops are designed for normal outdoor use in residential settings. To maintain the natural beauty we recommend resealing your
table top when necessary, with the same sealer product applied during the manufacturing process.  The sealer penetrates the stone 
and acts as a repellent, preventing absorption of moisture and stainable materials. 

If tabletop is stained with products such as wine, soda, coffee, or other colorants of organic origin, clean these spills immediately with a
mild detergent then rinse with water. In extreme cold climates, it is recommended that tabletops be stored in a dry indoor area or be
covered with suitable outdoor furniture cover. Be sure to allow space between the tabletop and the cover so that moisture does not
collect on the table; this will promote airflow and allow moisture to escape.

Содержание Orleans ORL4PCDFPSW2-BRY


















Отзывы: