INSTALLATION
1.
With the help of another person, turn the table base assembly in the
upright position. Carefully place the table top (not included) onto the table
base. After making any necessary adjustments to the alignment of the
table top and firepit base, use bolts and washers as shown in Figure 3.
Guide the bolts through the holes in the base brackets, into the pre-drilled
holes in the table top. Do not tighten completely. Repeat on other three
sides. (Note: holes do not go through to the top of the table. Holes shown
for illustration purposes only.)
Figure 3
2.
Pour all of the fire ices into the burner pan. Completely cover the burner
tube with fire ices as shown in Figure 4.
Burner Pan
Ignition Well
Figure 4
