fabric.
This is a multi-part assembly, Allow at least 1.5 hours for assembly.
Keep children away from the assembly area.
When your PERGOLA needs cleaning, use a mild detergent solution and rinse
!
SAFETY ADVICE
We strongly recommend the use of work gloves during assembly.
Do not attempt to assemble the PERGOLA in windy or wet conditions,
Do not touch overhead power cables with the aluminum profiles.
The PERGOLA must be positioned and fixed on a flat level surface.
Do not lean against or push the PERGOLA during construction.
Do not position your PERGOLA in an area exposed to excessive wind.
Do not attempt to assemble this PERGOLA if you are tired ,have taken drugs
or alcohol or if you are prone to dizzy spells.
If using a step ladder or power tools ensure that you follow the manufacturer's safety advice.
Hot items such as recently used grills, blowtorches etc.must not be stored in the
PERGOLA.
Ensure there are no hidden pipes or cables in the ground before inserting the pegs.
GENERAL ADVICE
Selecting a site-choose a sunny level position away from overhanging trees.
If you are fixing your PERGOLA directly to a solid concrete foundation use the
predrilled holes in the metal base supplied.
The component parts should be checked and laid out close to hand.
Keep all small parts(screws etc)in a bowl so they do not get lost.
Note that the door is hinged on the right hand side and therefore opens to the right.
Keep roof clear from snow and leaves.
CARE & MAINTENANCE
with cool clean water.
Do NOT use acetone, abrasive cleaners or other special detergents to clean the
-2-
Dispose of all plastic bags safely and keep them out of reach of children.
Always wear shoes and safety goggles when working with extrded aluminum.
Installation Tool:
5.Electric scre5mm Hexagon
2.Spanner 10mm/(25/64) (Ratchet Wrench is better)
1.Triangle Stairs≈
3.Spanner 14mm/(35/64) (Install the expansion screw)
4.Hexagon wrench 5mm(13/64)inch
wrench (suggest)
6.Wooden Mallet
7.Marking Pen
4.9 Feet Height
(13/64)inch
2.Angle Square
3.Level Meter
(16.4Feet)
1.Tape Measure
Measurement Tools
Percussion bit(10mm)
8.
(25/64")
10.Phillips screwdriver
9.Knife
