29
English
2.3.2
Setup Wizard
When turning on the TV for the first time, the Setup
Wizard is displayed to guide you through the basic
configuration of the TV.
1
Press
/
on the remote control to set the OSD
Language. The available options are:
English
,
Español
, and
Français
. Press
OK
to confirm your
selection.
2
Press
/
on the remote control to set the
environment. The available options are:
Home
and
Store
. Press
OK
to confirm your selection.
3
Press
/
on the remote control to set the Time
Zone. The available options are:
Eastern
,
Central
,
Mountain
,
Pacific
,
Alaska
,
and
Hawaii
. Press
OK
to confirm your selection.
4
Press
/
on the remote control to set the TV RF Source. The available
options are:
Air
and
Cable
. Press
OK
to confirm your selection.
5
Press
OK
on the remote control to start the channel scan. After completion, the
TV automatically switches to the first channel found.
2.3.3
Switching Source Signals
Press
INPUT
on the control panel or remote control to select the incoming signal
source to suit your need. Press
OK
to confirm.
2.3.4
Performing an Automatic Channel Search
Before using the TV to view programs, you need to activate the channel search first
if you skip the channel scan in
Setup Wizard
(see “Setup Wizard” on page 29).
1
Press
MENU
on the control panel or remote control, then select to enter the
Channel menu.
2
Select
Antenna
to set the signal source to
Air
or
Cable
.
3
Select
Scan Mode
to set the search mode to
Auto
(scan all channels),
Analog
(analog channels only), or
Digital
(digital channels only).
4
Select
Auto Scan
, and if
Cable
is selected in the Antenna option, set the analog
channel system to
Auto
,
Standard
,
HRC
, or
IRC
.
5
Select
Start
and press
OK
to perform the channel search. The Scanning
Message will be shown. After completion, the screen will switch to the first
channel found.
Enter
OK
OK
Exit
Menu
Menu
Move
Exit
Return
Return
English
Español
Français
Setup Wizard 1
OSD Language
Содержание SV32AMUB
Страница 1: ......
