32
Engli
sh
3.4 Adjusting Channel Settings
1
Press
MENU
to enter the OSD Main Menu
screen.
2
Press
/
on the remote control or
CH
S
/
CH
T
on the control panel to select
Channel menu.
3
Press
/
OK
on the remote control or
INPUT
on the control panel to enter the
Channel menu.
4
Press
/
on the remote control or
CH
S
/
CH
T
on the control panel to select an
item.
5
Press
/
OK
on the remote control or
INPUT
on the control panel to enter the item.
6
Press / on the remote control or
VOL+
/
VOL-
on the control panel to change
the scales or press
OK
on the remote control or
INPUT
on the control panel to mark
an item.
7
Press
RETURN
to return to the Channel menu.
8
Press
MENU
to exit the Channel menu.
9
The Channel menu can be used to perform a channel search and edit channel list
(see “Performing an Automatic Channel Search” on page 27 and “Editing Channel
Table or Favorite Channel” on page 28).
•The Antenna can be set to
Air
or
Cable
.
•The Scan Mode can be set to
Auto
,
Analog
, or
Digital
.
•The Auto Scan can be set to
Auto
,
Standard
,
HRC
, or
IRC
(under Cable mode
only).
Note:
The Channel settings are available when the signal is set to TV source.
Picture
Audio
Channel
V-CHIP
Setup
Antenna
Scan Mode
Auto Scan
Channel List
Exit
Return
Enter
Menu
Move
Return
OK
