HANNspree HL400UPB, Руководство пользователя

Страница: 9 / 24

User’s Manual
9
SETTING THE MONITOR ON THE WALL
DISSEMBLING THE STAND BASE:
1. Disconnect all the cables and cords from the Monitor to prevent breakage.
2. Carefully place the Monitor face down on a soft and flat surface (blanket, foam, cloth, etc) to
prevent any damage to the Monitor.
(For reference only)
VESA Spec Screw type Quantity
200 x 200mm M6 x L12mm 4
Note:

Please read the instructions of your specific wall bracket to properly wall mount the Monitor.

The pitch of the mounting holes is 200mm horizontally and 200mm vertically.

The screws type required is metric: M6, 12mm length.

The Monitor stand base can be screwed on a table or a hard surface using the hole on the back of
the stand base.

For use only with UL listed wall mount bracket.
*Installing the LCD Monitor requires special skill that should only be performed by qualified service
personnel. Customers should not attempt to do the work themselves. HANNspree bears no
responsibility for improper mounting or mounting that results in accident or injury. You can ask a
qualified service personnel about using an optional bracket to mount the Monitor to the wall.