Hanns.G HL203, Руководство пользователя

Страница: 21 / 23

User’s Manual
ERROR MESSAGE & POSSIBLE SOLUTIONS
ƒ CABLE NOT CONNECTED:
1. Check that the signal-cable is properly connected, if the connector is loose, tighten the
connector’s screws.
2. Check the signal-cable’s connection pins for damage.
ƒ INPUT NOT SUPPORT :
Your computer has been set to unsuitable display mode, set the computer to display mode given
in the following table.
FACTORY PRESET TIMING TABLE:
MODE RESOLUTION
HORIZONTAL
FREQUENCY (KHz)
VERTICAL
FREQUENCY (Hz)
1 640×400 @ 70Hz 31.469 70.087
2 640×480 @ 60Hz 31.469 59.940
3 640×480 @ 70Hz 36.052 70.004
4 640×480 @ 67Hz 35.000 66.667
5 640×480 @ 72Hz 37.861 72.809
6 640×480 @ 75Hz 37.500 75.000
7 720×400 @ 70Hz 31.469 70.087
8 800×600 @ 56Hz 35.156 56.250
9 800×600 @ 60Hz 37.879 60.317
10 800×600 @ 72Hz 48.077 72.188
11 800×600 @ 75Hz 46.875 75.000
12 832×624 @ 75Hz 49.725 75.000
13 1024×768 @ 60Hz 48.363 60.004
14 1024×768 @ 70Hz 56.476 70.069
15 1024×768 @ 75Hz 60.023 75.029
16 1152×870 @ 75Hz 68.681 75.062
17 1152×864 @ 75Hz 67.500 75.000
18 1280×720 @ 60Hz 45.000 60.000
19 1280×960 @ 60Hz 60.000 60.000
20 1280×768 @ 60Hz 47.776 59.870
21 1280×768 @ 75Hz 60.289 74.893
22 1280×1024 @ 60Hz 63.981 60.020
23 1360×768 @ 60Hz 47.712 60.015
24 1440×900 @ 60Hz 55.469 59.901
25 1400×1050 @ 60Hz 64.744 59.948
26 1600×900 @ 60Hz 55.540 59.978
21