User’s Manual
10
To set up the device, you need to assemble the monitor stand.
Join the stand base to the stand post. You should be able to hear it slot in. Insert the screw
enclosed, tightening it with a coin or a screwdriver, so that the stand base is attached
securely to the stand post. To set up the device, you must fi t the monitor base together.
You can adjust the height of the base. When the base of the monitor is extended, you can
tilt the monitor 90° (Pivot function)
.
POWER
POWER SOURCE:
1. Make sure that the power cord is the correct type required in your area.
2. This LCD monitor has an Internal universal power supply that allows operation in either
100/120V AC or 220/240V AC voltage area (No user adjustment is required.)
3.
Connect the AC-power cord one end to your LCD monitor’s AC-input socket, the other
end to wall-outlet .
