SNOOZE FUNCTION
1. Whenever the alarm activates, it can be temporarily suspended for a short period of 9 minutes by pressing
the
SNOOZE/DIMMER
Button once. The “
ALARM ON
” on the display will keep flashing.
2. The alarm will then automatically activate again after the 9 minutes SNOOZE period has ended.
3. This procedure can be repeated for up to approximately one hour.
FUNCTION MODES
1. Press
STANDBY
Button to turn on the Function mode
.
2. Press the
FUNC.
Button to select different function modes.
There are four function modes:
BLUETOOTH -> USB -> AUX-in -> FM RADIO
FM RADIO OPERATION
1. Press
STANDBY
Button to turn on the Function mode
.
2. Press the
FUNC.
Button to select
Radio
mode. The display will show radio frequency.
FULL SCAN:
1. Press the
/ FM SCAN/ BT UNPAIR
Button to perform a full FM
radio scan
Note: When first used, your radio scanned the FM band for available
stations. The station services found were then stored in your radio’s
memory. You can rescan the band at anytime if you move to a different
area or just refresh the stored list of available stations. The scanning
process will take a few minutes.
2. After the full scan, the radio will automatically store the first 20 FM
stations as presets for instant access to your favorite stations.
3. Use the
TIME/M+/+10
Button to skip to the next stored radio station. (From station: P1 to P20)
AUTO SCAN:
Press and hold the
SKIP+/TU+/LIGHT+ or SKIP−/TU-/LIGHT-
Button for
approx.1 second, it will start to search the next radio station in the
direction of the search. The search operation simply finds stations with
strong signals. Stations with weak signal can only be tuned in manually.
MANUAL TUNNING
Press the
SKIP+/TU+/LIGHT+ or SKIP−/TU-/LIGHT-
Buttons to tune
down or up the frequency by 0.1MHz.
ANTENNA
For best reception, fully extend the FM wire antenna to receive FM stations. .
SAVING RADIO STATIONS IN THE MEMORY
1. Tune to the desired stations.
2. Press and hold the
PRESET / ■
Button for approx. 1 second, the display will show ‘
PXX
’ and flashing,
where ‘
XX
’ is the next memory station number.
3. Press the
SKIP+/TU+/LIGHT+
or SKIP−/TU-/LIGHT-
Button to select the desired memory station number.
4. Press the
PRESET / ■
Button again to store the station in the memory.
5. Repeat step 2 to 4 to store more radio stations in the memory.
6. Up to maximum 20 FM radio stations can be stored in the memory.
-5-
SELECT A STORED RADIO STATION IN THE MEMORY
1. Press the
TIME/M+/+10
Button to select the stored radio station. (From station: P1 to P20 )
2. Press the
SKIP+/TU+/LIGHT+ or SKIP−/TU-/LIGHT-
Button to select the desired memory station number.
TURN OFF THE RADIO
To turn off the radio. press
STANDBY
Button to return to STANDBY mode.
AUX IN CONNECTION
1.
Press
STANDBY
Button to turn on the Function mode
.
2.
Press
FUNC
Button to select the
AUX-in
mode. The display will show “
AUH
”
3.
Insert one side of the audio cable (requires 3.5mm stereo plug, not supplied) into the line-out jack or
phones jack on your MP3 player and the other side to the aux-in jack at the back of the unit.
4.
Turn on your MP3 player/device and follow the playback instruction.
5.
Press
VOL+
Button to increase the volume. Press
VOL-
Button decrease the volume.
6. To stop this function, simply turned off your MP3 player or press
STANDBY
Button to return to STANDBY
mode.
BLUETOOTH
OPERATION
Connecting BLUETOOTH
1.
Press
STANDBY
Button to turn on the Function mode
.
2.
Press the
FUNC.
Button to select
BLUETOOTH
mode. The display will show “
bT
”.
3.
Turn on the Bluetooth of your device and search the unit for connection. Your Bluetooth device should find
“
HX-202Qi HANNLOMAX
”. Select this for connection.
4.
If connection is successful, your Bluetooth device will show Bluetooth is connected.
5.
Select and play the audio file though your Bluetooth device.
6.
You can use the
SKIP+/TU+/LIGHT+
Button to go to the next track or press the
SKIP-/TU-/LIGHT-
Button
to go back to the previous track. Press the
SKIP-/TU-/LIGHT-
Button twice to go back to the previous
track.
7.
Press the
/ FM SCAN/ BT UNPAIR
Button to temporarily pause playing. To resume, press the
/
FM SCAN/ BT UNPAIR
Button again.
8.
Press
VOL+
Button to increase the volume. Press
VOL-
Button to decrease the volume.
Bluetooth Auto paring
Once the unit paired with the Bluetooth device, it will automatically
pair with that device next time when you turn on the unit and that
Bluetooth device.
Bluetooth Unpairing
To unpair the Bluetooth device, press and hold
BT UNPAIR
Button. The unit will start to search for a new
connection.
Stop the BLUETOOTH streaming
To turn off the Bluetooth streaming, press
STANDBY
Button to return to STANDBY mode.
-6-
